3M

Usage Directions / Dosage: Important: Follow instructions carefully! Save instructions for clean removal in the future. To Mount Hooks: 1. Clean Surface - Clean surface with Isopropyl rubbing alcohol, wipe lightly, let dry. Do not use household cleaners. 2. Apply Strip - Separate strips. Remove red liner. Apply strip. Press firmly. 3. Press Firmly - Remove black liner. Mount hook and press entire hook firmly for 30 seconds. 4. Wait - Wait 1 hour. Save instructions for future removal. To Remove Hooks: 1. Slide Cover - Slide hook cover up to reveal base and removal tab. To avoid marking the wall, gently slide hook cover up without contacting the wall. Marks can be removed with Isopropyl rubbing alcohol. 2. Grab Tab - To prevent base from snapping your fingers, hold base. Do not press base against wall. Never pull the strip out at an angle. Strip could break or damage the surface. 3. Slide Tab - Slowly slide the tab straight down against the wall, stretching the strip at least 12 inches until base releases from the wall.