Bausch & Lomb

Usage Directions / Dosage: Before first use: Rinse lens case and caps thoroughly with either saline solution or disinfecting solution, depending on the method of disinfection used. Chemical disinfection: Clean and rinse lenses as directed by your eye care practitioner. Place the cleaned lens into correct chamber of lens case. Fill with fresh ReNu Multi Purpose solution or ReNu MultiPlus solution, and tightly close the caps. Leave the lenses in the lens case for a minimum of four hours. Important: if a lens well appears to be dry following the disinfection cycle, do not try to remove the lens. Refill the well with fresh saline or disinfecting solution, replace the cap tightly and allow 30-40 minutes for the lens to rehydrate. If a lens well continues to dry out, the case should no longer be used and should be replaced. For good lens care: After each use, rinse both lens case and caps with either saline or a disinfecting solution like ReNu or ReNu MultiPlus depending on the method of disinfection used in your lens care regimen. Allow lens case and caps to dry thoroughly. Replace lens case every few months.