Krazy Glue

Usage Directions / Dosage: 1. Protect work area. Glue may damage fabrics and furniture finishes. Screw cap onto tube. Cap automatically pierces tube. 3. Remove red cap from applicator before use. Gently squeeze tube applying one to four drops per square inch depending on porosity. Too much glue or spreading glue will make a poor bond or no bond. 4. Parts to be glued should be clean and dry. Parts must mate. Metals may have to be cleaned with a solvent or scraped. Dampen porous ceramics on one side and apply glue to dry side. Sand or plane wood surfaces flat. Remove paint, glue, etc. from surfaces to be bonded. 5. Join the parts and press for 30 seconds. Allow to set for a few minutes. 6. Replace red top over applicator tip. Not for use on paper, foam, rear view mirrors, polyethylene, Teflon or other fluorocarbons. Do not put bonded items in oven or on stove. Do not use to attach artificial nails. Store in cool, dark place.